Wood is a versatile material being used for the construction of so many products. These include furniture, doors, window sill, cabins, and so much more. If the wood has been in use for several years it may lose its original aesthetic look. To renew its finish you can use oils to make it look refreshed. Oils don’t provide a lot of shine but still gives a pretty finish. Oils are perfect to give the wood a natural finish and bring out the natural grain. Because it does not make the surface shiny it is perfect for uneven surfaces.
Oils are commonly used on kitchen utensils and house furniture. They are very eco-friendly, non-toxic, and food-safe making them perfect for utensils. They have been used to finish a wood surface for thousands of years and can be considered a more traditional option. They are very easy to repair so no need to worry about how you are going to maintain the wood again and again. But they don’t offer that much protection and durability as a lacquer or a varnish.
Any type of wood is an investment that should last for several years. And it is only by applying a proper finish that you will be able to achieve that. Finishes are of several types, one of them being hard wax oils.
Here are the types of oils which are best suited for your wood. 10 are listed below to help you choose the best one and the most suitable one for the wood you are working with.
10 BEST WOOD OIL
| No # | 10 BEST WOOD OIL | Price |
|---|---|---|
| 1 | SUNNYSIDE CORPORATION | Amazon Check Price |
| 2 | WATCO DANISH OIL | Amazon Check Price |
| 3 | WATCO TEAK OIL FINISH | Amazon Check Price |
| 4 | OSMO POLYX OIL | Amazon Check Price |
| 5 | FORMBY’S TUNG OIL FINISH | Amazon Check Price |
| 6 | CABOT STAIN AUSTRALIAN TIMBER OIL | Amazon Check Price |
| 7 | MINWAX TUNG OIL FINISH | Amazon Check Price |
| 8 | TRIED AND TRUE DANISH OIL FINISH | Amazon Check Price |
| 9 | OSMO TOPOIL | Amazon Check Price |
| 10 | WATCO TUNG OIL | Amazon Check Price |
1. SUNNYSIDE CORPORATION BOILED LINSEED OIL
Sunnyside corporation boiled linseed oil is a product that is simple and super easy to use. It is used on dry and cracking surfaces and also used to strengthen the already existing finish on it. It also brings out the natural grain and color of the wood. It can be used on interior and exterior woods alike.
Boiled linseed oil is faster to dry than the raw one. It only takes about 12 to 18 hours to dry and give off a uniform and smooth finish. It is water resilient and prohibits chalking. Also, this product is very suitable for many furniture finishes and antiques. But the problem is you can’t use it with the food preparation surfaces. This is because fast-drying products are not safe for consumption. You should make sure to read the labels before using them to avoid this kind of situation.
It is also known as flaxseed oil. It saturates deep into the wood like many other hand rubbed oil. It protects against scratching and changes in humidity. It gives a satin finish and is very eco-friendly. Raw, polymerized, and boiled linseed oils are all derived from the flaxseed plants but just processed differently. Raw one is the purest form of this oil but not suitable for wood finishes because of the time it takes for each coat to dry which can be up to several weeks. Boiled ones are best to use but they have some hazardous drying compounds. Polymerized linseed oil is the best in both fields i.e. it is pure and non-toxic and has a quick drying time.
2. WATCO DANISH OIL
Watco Danish oil is made for interior wood that has a varnish supplement. It has the finishing quality of wood oil and also provides protection just like that of a varnish. The dark brown color helps to bring out a very nice look. It applies very easily and perforates extremely into the surface for a very good finish. You can easily use it on the sand, bare, and stripped wood surface. It can easily be used with tight-grained woods and interesting grains because It can penetrate deeply into it without hiding the pattern.
The product requires a lot of maintenance and you will have to reapply it every now and then because it does not completely seal the wood. So if you don’t want the color to get darker every time it is recommended that you use it with a wax or a plain oil finish after applying the first layer.
Danish oil contains a mixture of linseed oil, or tung oil along with several other ingredients such as thickeners, thinners, drying agents, binding compounds, and more. It is basically a catch-all term for any oil-based wood finish. Danish oils are usually a mixture of linseed or tung oil along with some type of varnish and some companies also sell polymerized linseed oil under the Danish oil trademark name.
It provides a coverage of 170 square feet per packaging. It has a drying time of 6 hours. And it gives a satin finish in the end.
3. WATCO TEAK OIL FINISH
The watco teak oil finish is a product for tougher woods such as teak, mahogany, and rosewood. It goes way deeper into the surface and protects the wood from inside without leaving a film or cracking later.
It has a drying time of just 8 hours. It is water and UV resilient and protects the surface against them. This product is also very good for using marine items above the waterline. It is great to use on exterior and interior woods alike.
It also has a little bit of varnish just like the Danish oil and consequently gives a protective layer for the wood. And another common factor is that it also becomes darker in color after reusing a few times but the initial layer gives a very pretty color that gives off a hand-rubbed finish.
It is also not food safe and you should allow a rag to be put on it. So that it is dried completely and does not cause spontaneous combustion.
4. OSMO POLYX OIL
Osmo polyx oil is made using a mixture of oils and waxes. Oils such as sunflower, thistle, and soybean are used. And waxes such as carnauba and candelilla are used in this product. It applies a simple mineral spirit as a solvent. It has a smell that is not as bad as the other options on the list. If you apply this, it will easily last for a few years if handled with proper care.
It is very convenient but not a very cheap option. It is more on the expensive side of the spectrum but it is very long-lasting so it is a good purchase. It also is a very good option to use on indoors finishing, it conditions and protects against damages from drying.
5. FORMBY’S TUNG OIL FINISH
Formby’s tung oil can be used when you want to protect the finish and also don’t want to ruin the natural grain. It should only be used on interior projects. When it dries it has a clear look so It can definitely be used as a compliment if you want. It is resilient towards water and mildew and also helps to prevent chalking of the wood. It does not have a lot of gloss so it gives a natural hand-rubbed look. The wood piece can be conditioned to work with the natural toughness and its finish as well. The less glossy look will help hide any imperfections. Because the glossier you make the finish the more bumps will be put into the spotlight and if you don’t want that this product is exactly for you.
The tung oil actually comes from nuts and tung trees. It is your best option if you want an eco-friendly and nontoxic wood oil. You will get a subtle golden look on the surface as well keeping the overall aesthetic soft and a slight bit shiny.
It’s super easy to apply as well. You only need lint-free clothes, put a little of the product on it and apply it on the surface. Wipe it off after an hour and let it dry for 24 hours. Then apply another coat. Apply as many coats as you need to before the oil stops seeping into the wood and starts sitting on the surface.
It is a really safe and eco-friendly option but working with raw tung oil Is a little hard. It is not as durable as others so it is not suitable for the woods outside.
6. CABOTSTAIN AUSTRALIAN TIMBER OIL
Cabotstain timber oil will penetrate deeply into the wood surface. It gives a matte finish at the end. You can control the sheen by adding a few coats but it will never really give a shiny end result.
This product is a mixture of linseed oil and tung oil. It makes it a long while to dry but once it is, it will be resilient towards UV and water. It takes it 2 full days to dry so you should definitely consider that before buying.
This is strong enough to get through the grain. It is solvent-based and needs a lot of ventilation around when using it. It is also great for hardwood and natural grain.
7. MINWAX TUNG OIL FINISH
Minwax tung oil is very good for surfaces that are already finished and require a little bit of maintenance. It prevents chalking and cracking and it is water and mildew resistant. It also helps to neutralize any acidity and alkalinity.
Tung oil can be easily finished again and again so it is great for items you might want to alter after some time or change. This does not contain pure tung oil and you should use it with a solvent or a varnish so you don’t have to refinish an item fully. One more perk is that it dries really quickly so you can apply multiple layers without as much wait.
Since it has to be used with a solvent it needs a lot of ventilation around as well. It helps in the reconditioning of the interior woods but it is not to be used near a food prepping area such as a kitchen.
8. TRIED AND TRUE DANISH OIL FINISH
Tried and true Danish oil finish obviously contains Danish oil. This oil is linseed oil in its polymerized form. It is a better option than boiled linseed oil and takes a little longer to dry. It is an economical option that gives a nice outlook on the wood surface.
It does not involve the use and added varnish or anything else. It brings out the natural grain and compliments the finish, all the while helping to condition the floor. The prevention of drying can be obtained by reapplying it every now and then. It does not have a color of its own and the less glossy finish is very good for surfaces with bumps and imperfections in them. It greatly conditions and enhances the grain on surfaces.
It has a smell of cooking oil which stays for a little while but fades out after a while. It does not have a chemical smell like other options. And it is very safe to use around food prep areas and indoor furniture. It does not protect that well but it’s great for interior furniture and their looks.
9. OSMO TOPOIL
Osmo topoil is a mixture of wax and oils and it is great for food prepping surfaces and furniture. It conditions and brings out shine of the surface you are using it on. It protects the food prepping area from staining agents like wine and things with strong smells and it is also water-resistant.
It is clear when it dries and gives a pretty satin finish. It resists scratching and therefore helps to clean dirt and other stuff off the surface easily. You can condition your wood without taking this oil off and without having to sand the wooden surface. There is no color of this product so the only color that the wood accumulates over time is the deep color due to conditioning a lot. And the best part is that it is food grade product.
10. WATCO TUNG OIL
The watco tung oil is a mixture of dying ingredients and a blend. It is not really just tung oil and so it takes a lot less time to dry. Which is about 24 hours and after it dries it will give a beautiful color and bring out the natural grain. This is because it penetrates into the surfaces deeply and conditions and protects nicely.
It does not leave dark color over time. It is also very easy to use and it doe not leave tack behind like how pure tung oil does. It also has to be used with an added solvent so use it in a ventilated area. It can be hard to get it to be perfectly smooth but you can use it on a small area at one time so that it does not dry quickly. This is only because of the presence of drying agents.
These are all the products that will hopefully help you condition your wood very nicely. You can see that most of the products include linseed oil, tung oil, Danish oil, and waxes for the food safe ones. You can pick any one of these according to your need. All of these are great products and your wood will remain well maintained with using them.